Site icon Deep Green Permaculture

How to Kill a Tree Stump Without Poisonous Chemicals


Sometimes we need to cut down trees to remove them, but chopping trees down to the ground does not stop them putting out new growth from the stump or from the roots and eventually turning back into full sized trees again.

In fact, the technique of cutting trees down to a stump and letting them regrow is called coppicing, it’s a traditional woodland management technique and many trees can be coppiced for timber harvesting or other reasons and successfully regrow.

To get rid of a tree stump, you don’t need to chop or dig it out of the ground, use expensive machine or poisonous chemicals. Why avoid chemicals marketed as “Blackberry & Brush Killer” or “Tree & Blackberry Weed Killer”? You seriously do not want to contaminate your garden with these persistent poisons!

Avoiding the Poisonous Chemicals

Tree & Blackberry Weed Killer, Blackberry & Brush Killer and other such herbicides used for killing tress, woody shrubs and vines all contain triclopyr BEE (butoxyethyl ester), a selective systemic herbicide used for control of woody and broadleaf plants.

It’s a schedule 6 (S6) Poison, which is the highest toxicity level of poison that the general public is legally allowed to buy, and it’s going in your living space… Once it’s there, it will be around for a while too. Being a systemic herbicide, it soaks right through the plant or tree, making all parts of it toxic. The herbicide actually remains active once it’s in vegetation, even if it’s decaying. The safety sheets for triclopyr BEE sold to the agricultural market (sold under the trade name Garlon or Release) clearly state “DO NOT burn off, cut or clear for 6 months after treatment.” The contaminated waste contains active herbicide will still kill other plants and trees and burning it creates toxic fumes. This is not mentioned at all in the same products sold to the general public, which is highly irresponsible.

Why do agricultural products have extensive and highly detailed safety precautions that may be many pages long while the same products sold to the public have only a sentence or two? Well, chemical manufacturers couldn’t really care less about the health of the general public, but are very cautious in terms of liability and litigation should their products cause farmers to lose millions from accidental crop failures, which they would be sued for! It’s all about money…

It’s important to keep in mind that the contaminated tree material poisoned with triclopyr BEE will be toxic for at least half a year, and if you put any of the material into your soil or compost it will contaminate that too – it will kill plants and trees. The estimated half-life (where the chemical breaks down to half the original amount) in aboveground drying foliage is 2 to 3 months

Any triclopyr BEE applied will not stay at the site of application either. Soil mobility refers to how easily a chemical can wash away, move through soil and affect non-target plants and trees, as well as contaminate the water table or wash into waterways.

According to the Thurston County Health Department review of this herbicide:

Triclopyr BEE will quickly convert to triclopyr acid after application, which is highly water soluble and adheres poorly to soil, therefore, herbicides containing triclopyr BEE are considered high in mobility hazard.”

We’ve already mentioned that this toxic herbicide will persist for a while and doesn’t break down readily. How long exactly? The Thurston County Health Department review tells us:

Triclopyr BEE will convert to the acid form within a day of application and it is unlikely to dissipate into the air or break down interacting with water (hydrolysis). Triclopyr is primarily broken down by microorganisms in the top 12 inches of soil but when it gets deep into soil, where there is less oxygen, it can persist for years. Triclopyr is likely to break down to less than 50% of the applied concentration within 60 days of a land application, which is rated as moderately persistent.”

Since triclopyr is mobile in soil and moderately persistent it has a potential to leach into soil and groundwater and to contaminate drinking water. In terms of toxicity, triclopyr is considered moderately toxic to mammals and oysters, and low in toxicity to birds, insects, fish and crustaceans.

So, you can go the ‘man versus Nature’ chemical warfare approach and use triclopyr, which will contaminate your living area and the environment, or you can kill a tree stump much more safely and cheaply using a more sensible approach.

In Permaculture, the Problem is the Solution

In Permaculture’s design principles, we have the Attitudinal Principle – “Everything Works Both Ways”. Whether we see something as positive or negative, as a ‘problem’ or as a useful resource, depends on our attitude.

Typically, people see a disadvantage as a ‘problem’ and then implement an energy-intensive ‘solution’ to attempt to ‘fix the problem’. The other option is to take a different attitude, look at everything as a positive resource, and figure out how to make use of it! We can get creative and think of all the ways we can turn these disadvantages into useful things we can use in our system.

With this in mind, have you ever accidentally killed a young tree or plant by over fertilizing, or known anyone that has? It happens all too often, with people getting carried away with large amounts of chicken manure in their garden, and especially with young citrus trees because gardeners hear that they’re ‘heavy feeders’ and over-feed them!

When excessive fertilizer is applied around the roots of a plant or tree, it creates a high concentration of salts in the soil, and through osmosis, water naturally moves from areas of low salt concentration to areas of high salt concentration to equalize the proportion of water to fertilizer salts. What large amounts of fertilizer do is draw water out of the roots, drying the plant or tree out, causing the symptoms of lack of water, such as leaf burn, and if the desiccation is extreme enough, the death of the plant or tree results – this phenomenon is called fertilizer burn.

The osmotic desiccation of plants through fertilizer burn can be a problem when over-fertilizing, but it can be used to our benefit to kill tree stumps too, with a few subtle changes to the process!

Killing Tree Stumps with Epsom Salts

Epsom salts is nothing more than magnesium sulphate, people use it in their baths to relax, and gardeners use it as a supplementary nutrient to rectify magnesium deficiencies in plants and trees. It’s also readily available, cheap and completely safe for people and the environment.

Large amounts of Epsom salts will draw moisture out of a stump much like an over-application of fertilizer does to roots, eventually drying it out, after which it will just naturally rot away. Any magnesium released into the soil will just be taken up by plants – magnesium is the key element in chlorophyll which allows plants to photosynthesize and makes leaves green.

To kill a tree stump with Epsom salts, you’ll need the following tools and materials:


A drill with a long drill bit around 25mm (1”) wide is required for the task.

Either an electric drill with a spade bit, or bit brace with an auger bit will work fine for drilling wide holes into a tree stump.

An electric drill with spade bit and hand brace with auger bit for drilling a tree stump


A packet of Epsom salts, which can be purchased from the supermarket or a pharmacy/drugstore.

One packet of Epsom salts is sufficient for a large tree stump

Some water will be needed to moisten the Epsom salts. If there’s no access to water nearby, fill a plastic bottle with water and take it along with you!

Some water will be needed to moisten the Epsom salts once it’s place d in the holes drilled into the tree stump

The only other item required is a sheet of plastic, garbage bag or tarp to cover the stump, to protect it from the rain, and prevent the Epsom salts form being washed out.

A single garbage bag or plastic bag is required per tree stump

Procedure for Killing a Tree Stump with Epsom Salts

Drilling depth, width and spacing for Espom salts application
  1. Drill holes into the top of the tree stump, using a 25mm (1”) drill bit. Drill holes at least 15-20cm (6-8”) deep using a spade bit or auger bit.

    On larger tree stumps, space the holes around 7-10cm (3-4”) from the bark edge and from each other.

    On smaller tree stumps aim for six or more holes.

    The intention is to create enough holes that run deep enough to hold a sufficient amount of Epsom salts so that it can more easily penetrate into the wood and the roots to dry them out.
  2. Fill all the holes with dry Epsom salts all the way to the top.
  3. Slowly add just enough water to each hole to moisten the Epsom salts – it doesn’t need to be really wet, just moist, and be careful to not wash the Epsom salts out of the holes.
  4. To prevent the Epsom salts being washed out by rain, cover the stump a sheet of plastic, a garbage bag or a tarp, and anchor or fasten down the cover so it doesn’t get blown away by the wind.

That’s all there is to the process, it’s fairly straightforward!

Additionally, if roots extend from the side of the stump, they too can be drilled and filled with Epsom salts. If the stump if freshly cut, once it is drilled and the holes are filled with Epsom salts, the whole surface of the stump can also be cover with a thick layer of Epsom salts to speed up the drying process.

The stump can take up to six months to dry out, depending on the size of the tree and its root system. Check the stump each month to see if the level of the Epsom salts in the holes has dropped as it’s been absorbed. If it has, top up the level of the Epsom salts and moisten as before.

Hopefully you won’t have to kill too many trees on your gardening journey, but if you do have to remove a tree, this is definitely a much better way to get rid of living tree stumps than contaminating a garden with poisonous chemicals!


  1. Thurston County Health Department – Thurston County Review, triclopyr BEE (butoxyethyl ester)
  2. EXTOXNET Extension Toxicology Network, Pesticide Information Profiles – Triclopyr
  3. National Pesticide Information Center – Triclopyr (Technical Fact Sheet)
Exit mobile version